HOW TO MAINTAIN THE MOUNTER?

SMT Mounter adopts the fourth generation electronic assembly technology, which has the advantages of high density of components, easy to complete automation and can improve production power. SMT Mounter, there is a very important component, that is, the solenoid valve, in daily use, we should often repair and maintain the solenoid valve, so what should we pay attention to in the use of protection?
1. We must carry out maintenance in accordance with the order of the operation manual, otherwise incorrect operation method may become the cause of damage and poor operation of the machine or equipment.
2. Low frequency operation, in order to avoid the bad operation of the solenoid valve, try to ensure that the solenoid valve switch action check once a month.
3. Pay attention to the equipment disassembly and compressed air supply and exhaust. When we disassemble the machine, we must first admit that the equipment to prevent the driven object from falling and misoperation has been set up, then the air and power supply can be cut off, and the residual pressure in the system can be discharged through the residual pressure discharge function. In addition, if you want to restart the equipment or change it, you must first acknowledge whether there are measures to avoid the drive elements flying out, and to acknowledge whether the machine is working normally.
4. The condensate is released. Remember to remove the accumulated condensate in the air filter regularly.
5. Manual operation. Manually operated equipment operates at the beginning. Then please acknowledge the safety before operation.
Now SMT Mounter on the market is mainly divided into four types: composite, boom, turntable and large parallel system. Each type of SMT domestic SMT Mounter has its own good or bad, which mainly depends on the application or process requirements for the system, and there is a certain balance between its speed and accuracy. Boom type machines have good flexibility and accuracy, and are suitable for most components. Generally, high-precision machines are of this type, but they are far away from compound, rotary and large parallel systems in speed.