 |
LED backlight source is developing towards ultra-thin (1) LED thinning, high power and light guide plate thinning According to the forecast of DisplaySearch, a market research organization, the global sales of LED LCD TVs in 2009 was about 4.09 million units, accounting for only 3% of the entire ... Read More
|
| |
SMT features and SMT eqiupments SMT is Surface Mounted Technology (short for Surface Mounted technology). After SMT is used, the size of electronic products is reduced by 40%-60% and the weight is reduced by 60%-80%. High reliability and strong vibration resistance. Low defect rate of solder joint. ... Read More
|
| |
What does the SMT workshop do? SMT workshop in electronics factory Mainly divided into DIP line and SMT line SMT stands for Surface Mount Technology electronic components Hit the PCB board through the equipment Then it is heated through a reflow oven Fix components to the PCB DIP is a hand-inserted ... Read More
|
| |
The main reason of the SMT machine chip throwing The so-called throwing material, refers to the feeding machine in the suction after the non-stick material, but the material into the throwing box or other places, or do not suction the above throwing action. The main reason for throwing material ... Read More
|
| |
Getting Started - SMT pick and place machine As a high-tech product, the placement machine is very important to both machines and people to operate safely and correctly. The most basic thing to operate the placement machine safely is that the operator should have the most accurate judgment and ... Read More
|
| |
What are the detection links of SMT line? 1. There are many kinds of patch inspections, starting from silk screen printing, including silk screen inspection, pre-furnace patch inspection, and post-furnace inspection, all of which can be inspected by AOI. The inspection benchmarks are set according ... Read More
|
| |
Raw materials for SMT processing In SMT chip processing, it is not only necessary to have PCB and components. In SMT processing, it is also necessary to participate in the production of raw materials, such as solder paste, chip glue, flux, etc. 1. Solder paste Solder paste is a paste formed by ... Read More
|
| |
Future development of flexible strip lighting LED light belt refers to the LED assembly in the belt FPC(flexible circuit board) or PCB hard board, because its product shape like a belt and named. Because of the long service life (normal life in the general 80 ~ 100 thousand hours), and very energy ... Read More
|
| |
Do you even know about X-ray? Advantages and characteristics of X-RAY non-destructive ray inspection equipment: X-RAY non-destructive ray detection equipment is X-ray perspective machine, the principle is to use the characteristics of X-ray energy to penetrate non-metallic substances. Using the ... Read More
|
| |
Stencil printer Production Process Operation Flow 1.Special Hopper must be used for loading and unloading to prevent material from falling. 2. To sharpen the blade, you must use a special glove for the anti-cutting hand. 3. The upper and lower version of the roll, must be on the version of the ... Read More
|
| Factory Address:HENGFENG INDUSTRIAL AREA,ZHOUSHI ROAD NO. 739,HEZHOU COMMUNITY,HANGCHENG STREET,BAOAN,SHENZHEN,CHINA | |
| Sales office:HENGFENG INDUSTRIAL AREA,ZHOUSHI ROAD NO. 739,HEZHOU COMMUNITY,HANGCHENG STREET,BAOAN,SHENZHEN,CHINA | |
| +0086-136-70197725 | |
| linda@eton-mounter.com | |
