Mounter maintenance preparation and maintenance methods

The placement machine is the most core automation equipment in the SMT process. It is a highly automated production equipment, which is equivalent to a placement robot. For this kind of high-precision production equipment, it must be properly maintained on a regular basis. The following editor will share the preparations and methods for maintenance of the ETON placement machine.

The ETON placement machine is a very complex, high-precision and high-tech machine. It must be installed on a flat and hard ground, in a clean environment, and work under constant humidity and temperature. It is necessary to strictly follow the equipment maintenance regulations to maintain the ETON placement machine daily, weekly, monthly, semi-annually, and every year in order to ensure the normal operation of the ETON placement machine.

1. Thoroughly clean the dust and scale generated on the surface of the machine and the electric board. This is to prevent dust and grease from being carried out in the internal parts of the machine. Of course, the main purpose is to prevent the electrical appliances from overheating. Cause damage.

2. The internal air circuit, solenoid valve and vacuum generating device must be thoroughly disassembled and cleaned. This is to prevent the electrical appliance from clogging due to fouling. Of course, the vacuum generating device and the cylinder are all composed together. Department, so it is easy to cause component strain together.

3. Lubrication of the sliding head and the lead screw Wipe the sliding rail and the lead screw with dust-free paper to ensure that there is no residual oil and debris.

Use a grease gun to inject lubricating oil from the screw, grease nipple on the slide rail, slide rail and the contact surface of each pair of movable screws until the dirty lubricating oil is squeezed out, and wipe it clean with dust-free paper. Move the machine head manually to distribute the oil evenly on the surface of the screws and slide rails.