SMT pick and place machine is a high degree of automation, complex structure of advanced electronic assembly manufacturing equipment, we want to correctly and safely use placement machine, must pay attention to the details of each part, now let's understand the operation requirements of pick and place machine.
I. Environmental requirements for the use of placement Machine:
1.Room temperature should be around 24℃.If the temperature is too low or too high, the mechanical movement of the control module in the placement machine and control box will be adversely affected.
2.The workshop is sealed and dust-free.When there is a large amount of dust in the air, it will also affect the sensitivity of the mechanical motion part and the sensor.
3.There shall be no other equipment around the SMT machine to produce large mechanical vibration and electromagnetic interference, so as not to affect the SMT machine's normal work.
II. Safety requirements for use of placement Machine:
1.Untrained operators are strictly prohibited to operate on the SMT machine.
2.The operator of the SMT machine should operate the SMT machine strictly in accordance with the operating rules, otherwise the SMT machine may be damaged or endanger personal safety.
3.Placement machine operators should be careful to avoid unnecessary trouble.
If you want to consult or understand THE SMT production workshop, SMT SMT placement machine, or other SMT placement machine supporting equipment, you can consult us at ETON.

The following is my contact information:
whatsapp/wechat :+8613824337025 E-mail:ethel@eton-mounter.com