SMT placement machine boot process

1. Turn on the machine in accordance with the equipment safety technical operating regulations.

2. Check whether the air pressure of the placement machine meets the equipment requirements, generally about 5kg/crri2.

3. Turn on the servo.

4. Return all axes of the placement machine to the source point.

5. Adjust the guide rail width of the placement machine according to the width of the PCB. The width of the guide rail should be about Imm larger than the width of the PCB, and ensure that the PCB slides freely on the guide rail.

6. Set up and install the PCB positioning device:

①First, set the PCB positioning method according to the operating rules. Generally, there are two methods of pin positioning and edge positioning.

② When using pin positioning, install and adjust the position of the positioning pin according to the position of the PCB positioning hole L. Make the positioning pin exactly in the middle of the positioning hole of the PCB to make the PCB go up and down freely.

③If edge positioning is used, the position of the stopper and the top block must be adjusted according to the outline size of the PCB.

7. Place the PCB support thimble according to the PCB thickness and external dimensions to ensure that the force on the PCB is even and not loose during patching. If it is a double-sided mounting PCB, after the B (first) side is mounted, the position of the PCB support thimble must be re-adjusted to ensure that when the A (second) side is mounted, the PCB support thimble should avoid the already mounted side B. Installed components.

8. After the setting is completed, the PCB can be installed for online programming or patch operation.