multifanctional high speed pick and place mounter,smt pick and place machine,automatic mounter,magnetic linear motor

 
6.Company profile

Business terms:

 
 
7.Our  Our certificates and certifications

 
 
8. trade show

 
9. FAQ

contact
Name:Brynn
Email :Brynn@eton-mounter.com
WeChat:13802252825
Telephone:138 0225 2825

 
 
Industry related knowledge

Adaptability of SMT placement machine

Operation Process of Patch Machine

• Set the working state of the placement machine

• Data preparation procedures;
• Touch PROGRAM, corresponding F4 button so that the screen will be displayed PROGRAM the menu
• Pressing the CHANGE, screen corresponding to the F1 key will display the stored program in the machine, and select the production program through the digital key;
• Select the production mode, after selecting the production program, press RETURN, corresponding F6 key, until the screen main menu, this time press AUTO corresponding F1 key, screen display submenu SO.. NO RETURN START. PB press MODE corresponding F5 key until "MODE;" the corresponding PROD. at the bottom left of the screen

• Check that the patch suction is not good

When cleaning the suction nozzle, check whether the CENTER,BRIGHT of the suction nozzle is OK.. Press SET corresponding F5 key in the main menu, appear SET sub-course STATUS,MANUAL,PROGRAM,PROPER,SERVO,PSTION,RETURV press the corresponding F3 key, appear CAMERA,SCALE,CENTER,BRIGHT,RETURN.. Press CENTER corresponding F4 key, machine prompt PUSH,START press the START key, the machine can test the center of the NOZZLE, the same testable BRIGHT..