Payment & Shipping Terms:
|Model:||HT-E8S-1200||Warranty:||1 Year,12 Months|
|Name:||SMT Pick And Place Machine,SMT Chip Mounter||Application:||SMD Production Line,SMT Production Line,for SMT Machine|
|Power Supply:||380V 50HZ||Condition:||100% Original,Brand-new|
|Product Name:||Place Machine\ LED Mounter\LED Assembly Machine,Automatic SMT Mounting Shooter||Weight:||1700KG|
|Mounting Speed:||45000 CPH||Type:||SMT Machine Related Products|
|Usage:||Circuit Board Assembly,SMT Mounting Machine,SMD,LED||Dimension:||2550*1650*1550mm|
45k CPH SMT Mounting Machine,
DOB Bulbs SMT mounter machine,
power driver SMT mounter machine
SMT mounting machine for kinds of application,DOB bulb,lens,power driver etc.
PCB Length Width:Max:1200*500mm Min:100*100mm
PCB Clamping:Adjustable pressure pneumatic
Mounting Mode:Group picking and separate placingseparate picking and separate placing
Mounting Height:<15mm (Automatic Changing)
Mounting Speed:45000 CPH
Components:LED,capacitors,resistors,IC,shaped components, etc.
Transmission Direction:Both direction (option)
1. Voltage: LED bulbs use a low-voltage power supply, between 2 and 4 volts, depending on the product, so it is driven by a more secure than high-voltage power supply, especially for public places;
2. Current: working current in 0-15 Ma, brightness with the increase of current brightens
3. Efficiency: use 80% less energy than incandescent bulbs with the same light efficiency.
4. Serviceability: very small, each unit LED chip is 3-5mm square, so can be made into a variety of shapes of devices, and suitable for volatile environments.
5. Response time: the response time of incandescent lamp is millisecond, and that of LED lamp is nanosecond.
6. Environmental pollution: no harmful metal mercury. 7.Color: color can be changed by changing the current, and the light-emitting diode can be conveniently modified by chemical methods to adjust the band structure and band gap of the material to achieve multi-color red, yellow, green, blue and orange luminescence.
Single rail conveyor
For connections between SMT production lines, PCB buffering, inspection, testing, or electronic component.
1.1Before power-on Check
1. check the supply power cord is broken.
2. Check that the equipment is properly grounded.
2.2 order of operation
1.control panel note finish button without self-lock, each click, that check is completed,PCB through, continue to run. 2.Pass PCB board without check, automatically pass; 3.press check means PCB board need manual check, need to use with finish.
4.Power is the power switch, press power
5.Light is the light switch.
3.3The operating step explains
1. adjust the belt running speed according to the speed of the front and back connection.
2. automatic control mode
a. Press the Power Button;
b. Press the LIGHT button;
c. Press the PASS/CHECK button.
a. Press the POWER button;
b. Press the LIGHT button;
c. When you are finished, press the FINISH button.
d. Turn it off and press the POWER button
Contact Person: Ms. Linda
Tel: 0086 13670197725 (Whatsapp/Wechat)
Fax: 0086-755- 29502066